top of page
  • Writer's pictureRaim Yestayev

Seamless Gutter Repairs Made Simple

Proper maintenance of your commercial building's metal roof and gutters is essential to avoid issues like leaks caused by clogged gutters. Debris, such as leaves, often accumulates and causes gutters to clog, which can lead to leaks at the seams. In this comprehensive guide, we'll walk you through an easy yet effective method to seal gutter seams and make them watertight without the need for disassembling the entire gutter system.

Identifying the Problem:

One of the most common problems with gutters is clogging due to debris, resulting in leaks at the seams where gutter sections connect. These leaks occur when water accumulates between the sections, and the seal or gasket meant to prevent leaks fails to function properly.

Repairing the Gutter Seam:

The good news is that you can address this issue without dismantling the entire gutter system. Here's a step-by-step guide to making your gutter seams watertight:

1. Clean the Gutter:

Start by ensuring the gutter is clean and free of any debris. Remove leaves, twigs, and dirt from the gutter channel, allowing it to dry completely.

2. Gather Your Materials:

Before beginning the repair, make sure you have Turbo Poly Seal, a high-quality sealant, readily available.

3. Apply Turbo Poly Seal:

- Once the gutter is dry, generously apply Turbo Poly Seal along the entire length of the seam where the leak is occurring.

- Use a paintbrush to ensure an even coat of sealant, covering the seam thoroughly.

4. Add Polyester Fleece:

- To reinforce the seal and create a durable barrier, place a strip of polyester fleece over the wet Turbo Poly Seal.

- Gently press the fleece into the sealant to ensure a secure bond.

5. Apply the Topcoat:

- After embedding the fleece, apply a final coat of Turbo Poly Seal over the top of the fleece. This seals the fleece in place and provides an additional layer of protection.

6. Allow for Cure Time:

- Let the repaired seam dry for approximately 20 minutes. Ensure that it remains protected from any rain or water during this time.

7. Test the Repair:

- Once the repair is dry, test it by running water through the gutter. Verify that there are no leaks along the previously problematic seam.

8. Maintenance and Preventive Measures:

- Regularly inspect and clean your gutters to prevent clogs and future leaks. Consider installing gutter guards or screens to reduce debris buildup.


Repairing a leaking gutter seam doesn't have to be complicated or costly. By following the straightforward steps outlined in this guide and using the right materials, you can effectively address the issue and ensure your gutters remain watertight. Routine maintenance, including regular cleaning and inspections, is essential for extending the life of your gutter system and preventing potential water damage to your commercial building. Stay tuned for more helpful tips and guides by subscribing to our updates!

(678) 794 - 3212

1 view0 comments


bottom of page